Low price, high efficacy, best market performer DIRECT REPLACEMENT 2’ and 4’ LED Linear available in a wide range of Kelvin temperatures and socket ends. No need to remove the ballast or change the wiring. UL Type A ballast compatible linear.

Technical Specifications

Housing 6060 Aluminum and White Polymers
Mounting Mounts into existing T8 rapid start sockets
Applications Retrofit existing fluorescent fixtures; new fluorescent style fixtures

Electrical Specifications

Lighting Source Standard SMD 3528
Wattages 2' = 8w
4' = 16 & 20w
Power Source Internal driver
Power Factor >0.9
Operation Temperature -20° C to 40°C
Input Voltages 110-347v, when powered with a ballast

Optical & Performance Specifications

Luminous Flux 2' - 8w: 880L | 4' - 16w: 1760L | 20w: 2200L
CRI >80
Lens Clear or Frosted
Beam Angle 120°
L70 >50,000 hours
LM79 110 L/W ± 5%
Downflux Efficiency 98.4% (clear lens)
Certifications Type A, cUL & UL Listed, RoHS, FCC


Kelvin: 3000K, 4000K, 5000K

Lens Options: Clear and Frosted

Voltages: 100-277vAC and 277-347vAC (when powered by ballast)


  • Tested on 220+ Phillips, GE, Sylvania instant start ballasts
  • 5 year warranty
  • 80+ CRI


Note: Ballast compatible LED linears are not warrantied when used with ballasts that are not on the ballast compatibility list. LED linears may work for a short time then fail when used in conjunction with non-tested ballasts. Testing procedure – submit a specification sheet and 2 samples of the ballast for testing. Testing may take up to 2 months to complete. You may also order samples, install them and if they work for longer than 2 weeks, with no apparent flickering or fail off/recover cycles then typically the LED linear is known to be compatible. A field report would be required along with a copy of the ballast specification sheet and warranty certificate. Ecopower reserves the right to refuse to test certain ballasts.